What are the differences between switchgear and distribution cabinets

1. Different functions: The switchgear is used for opening and closing, while the distribution cabinet is used for distributing electricity.

2. Different appearance: The switchgear has a larger volume and needs to be placed separately in one place, while the distribution cabinet is smaller and can be directly fixed inside the wall.

3. Installation locations are different: switchgear is not very common and is mainly used indoors, while distribution cabinets are available in schools and shopping malls.

How to maintain the distribution cabinet

1. After a long period of use, the surface of the distribution cabinet will be covered with a large amount of dust and stains. If too much dust accumulates, it will be limited in the later stage. If you want to clean it again, it will become more difficult. Moreover, the wire joints inside the distribution box must be firm to prevent some leakage problems.

2. For the switches inside the distribution cabinet, it is also necessary to regularly check to see if they are functioning properly. If there are any problems, they must be replaced immediately to prevent them from being unusable in emergency situations later on, which is also very troublesome. Moreover, the location of the distribution cabinet should be kept away from rainwater, otherwise there may be safety issues if it is submerged in water.

3. If there is a heating phenomenon in the power cord inside the distribution cabinet, it is necessary to shake and detect it. The specific cause must be found first, and repairs must be done. There are also some exhaust fans inside the distribution box, which need to be checked regularly to see if they can operate normally. This can minimize the risk factor.

Summary: This is the introduction to the differences between switchgear and distribution cabinets. The differences between the two are the points mentioned above, and their uses and appearances are also somewhat different. Therefore, it is necessary to understand them clearly before use.