IBZDPS-T-100KVA transformer
Product Overview
This 100KVA industrial transformer features a dynamic load optimization design (20%-50% duty cycle), integrated intelligent temperature control (triggered at 85°C), and strictly controls leakage current below 0.5mA. Its Class F insulation material (temperature resistance to 155°C) and efficient water cooling circulation system (ZG1/4 connector, 8L/min flow rate) ensure stable operation under high-intensity welding conditions.
Features
◆Smart grid adaptation
Wideband PLL synchronization technology achieves 50/60Hz adaptation
±10% voltage fluctuation adaptive compensation
Harmonic suppression capability of THD<3%
◆Efficient thermal management
8L/min high-speed water cooling system (ZG1/4 interface)
Copper-aluminum composite heat dissipation structure (ΔT≤12K)
Three-level temperature control protection threshold: 85℃/95℃/105℃
◆Electrical safety system
3800V/1min power frequency withstand voltage certification
Dual circuit leakage protection (≤0.5mA)
Partial discharge of key components <5pC
◆Industrial protection design
F-class insulation system (155°C continuous temperature resistance)
IP54 protection + 96h salt spray test certification
5-2000Hz/10G vibration tolerance
◆Intelligent monitoring
16-point temperature sensing network
MODBUS-RTU protocol support
Fault self-diagnosis coverage rate of 98%
Application scenarios
1.Shipbuilding and repair welding
Suitable for high-intensity operations such as hull assembly/section welding.
Specially optimized salt spray corrosion resistance (in compliance with DNV GL standards).
Typical application: continuous welding in a ship vibration environment above 5G.
2.Oil and gas pipeline projects
Matches the precise voltage requirements of automatic welding systems (±1% output accuracy).
Suitable for outdoor operation in a wide temperature range (-30℃~50℃).
Typical working conditions: X80/X100 high-strength steel pipeline full-position automatic welding.
3.Heavy steel structure manufacturing
Suitable for welding thick plates such as H-beams and box columns (over 50mm).
Supports cluster power supply mode of multiple machines in parallel.
Typical parameters: Full load welding operation lasting more than 8 hours.
4.Industrial-grade continuous welding equipment
Optimized for automobile/pressure vessel production lines.
Integrated splash/dust protection design.
Typical configuration: power supply system for robot welding cell.